The Dura-Post® high performance delineator post is an injection molded urethane flexible post that has been tested to withstand an extreme number of high speed impacts. It meets the requirements of NCHRP Report 350 Category 1 Devices, has been NTPEP tested and meets MUTCD Section 6F.63 + 6F.65 requirements for channelizing devices and tubular markers. The Dura-Post® delineator post is best utilized in locations with high speed/high impact frequency and is ideal for assembly in construction zones, heavy traffic areas, bridges, and HOV/HOT demarcation.


  • Tapered one piece urethane design.
  • Round post design can provide increased visibility in up to 360° direction.
  • Designed to remain flexible over a wide temperature range.
  • High intensity, flexible prismatic reflective sheeting standard.
  • Standard post colors: white, yellow, orange.
  • Standard reflective colors: silver, amber, orange.
  • Custom post colors: blue, green, black, red, dark gray, light gray, yellow-green.
  • Various heights available.


  • Post stub fits in base or anchor socket.
  • Designed to last longer than standard delineators.
  • Single retaining pin for installation or replacement.


Base and Anchor Options

  • Surface mounts for asphalt or concrete
  • Soil anchor
  • Bolt down, epoxy, or butyl pads


  • 36″ High (various heights available)
  • 3″ Post Diameter
  • 2.11 lbs. (.95 kg)
  • 8″ Base Diameter

Product Images

Product Documents


PI Sheet





Product Inquiry Form


Are your delineators reboundable?

All Safe-Hit delineators and posts are tested to rebound from impacts and rollovers in accordance with NTPEP test requirements. The Dura-Post is tested to over 200 impacts and rollovers at 60 mph.

Are Dura-Post® and Safe-Hit® product line parts interchangeable?

No. There are slight differences between the mounting features of the Safe-Hit product line and the Dura-Post product line.

Do the delineator posts come with caps?

All Safe-Hit posts come capped. Dura-Post delineators do not come capped, but caps can be requested during the order process.

What different colors of posts, reflectives and bases do you offer?

Standard Post Colors: White, Yellow, or Orange. Custom Colors: Light Gray, Dark Gray, Green, Blue, Black, Brown, or Red. Standard Reflective Sheeting: Silver, Amber or Orange. Request our Decals & Reflective Sheeting document for other reflective options. Standard Base Color: Black. Custom Base Colors: Yellow or Orange. Note, minimum quantities for non-standard colors may apply. Inquire for details.

How warm should a concrete or asphalt surface be for an epoxy application?

The recommended installation temperature is 50 degrees Fahrenheit (10 degrees Celsius) or above. If weather conditions are colder than a minimum installation temperature of 45 degrees Fahrenheit (7.2 degrees Celsius), a blowtorch can be used to warm the asphalt or concrete surface. Additionally, to enable the epoxy to mix easier, it can be warmed up in a warm vehicle prior to application.

Why have my white Safe-Hit posts which have been in storage turned pink?

Due to the ultraviolet (UV) inhibitors in our post’s polyethylene composition, posts kept in storage and in dark conditions will exhibit a change in color shade from white to pink. When you pull a Safe-Hit post from the cardboard shipping box and notice a pink blemish on the post do not be alarmed. This is a normal, temporary reaction between a substance in the cardboard when it is in contact to the delineator material. When the delineator is exposed to sunlight the pink blemish will disappear in a matter of hours.